diff options
Diffstat (limited to 'lib')
| -rw-r--r-- | lib/clipboard.zsh | 8 | ||||
| -rw-r--r-- | lib/compfix.zsh | 44 | ||||
| -rw-r--r-- | lib/completion.zsh | 5 | ||||
| -rw-r--r-- | lib/correction.zsh | 1 | ||||
| -rw-r--r-- | lib/directories.zsh | 14 | ||||
| -rw-r--r-- | lib/functions.zsh | 29 | ||||
| -rw-r--r-- | lib/git.zsh | 48 | ||||
| -rw-r--r-- | lib/history.zsh | 56 | ||||
| -rw-r--r-- | lib/misc.zsh | 19 | ||||
| -rw-r--r-- | lib/prompt_info_functions.zsh | 19 | ||||
| -rw-r--r-- | lib/spectrum.zsh | 2 | ||||
| -rw-r--r-- | lib/termsupport.zsh | 4 | ||||
| -rw-r--r-- | lib/theme-and-appearance.zsh | 53 |
13 files changed, 144 insertions, 158 deletions
diff --git a/lib/clipboard.zsh b/lib/clipboard.zsh index b663800a4..2c93d1bb5 100644 --- a/lib/clipboard.zsh +++ b/lib/clipboard.zsh @@ -31,13 +31,13 @@ function clipcopy() { cat $file > /dev/clipboard fi else - if which xclip &>/dev/null; then + if (( $+commands[xclip] )); then if [[ -z $file ]]; then xclip -in -selection clipboard else xclip -in -selection clipboard $file fi - elif which xsel &>/dev/null; then + elif (( $+commands[xsel] )); then if [[ -z $file ]]; then xsel --clipboard --input else @@ -74,9 +74,9 @@ function clippaste() { elif [[ $OSTYPE == cygwin* ]]; then cat /dev/clipboard else - if which xclip &>/dev/null; then + if (( $+commands[xclip] )); then xclip -out -selection clipboard - elif which xsel &>/dev/null; then + elif (( $+commands[xsel] )); then xsel --clipboard --output else print "clipcopy: Platform $OSTYPE not supported or xclip/xsel not installed" >&2 diff --git a/lib/compfix.zsh b/lib/compfix.zsh index 208aaadb1..b09b283f2 100644 --- a/lib/compfix.zsh +++ b/lib/compfix.zsh @@ -2,10 +2,6 @@ # insecure ownership or permissions) by: # # * Human-readably notifying the user of these insecurities. -# * Moving away all existing completion caches to a temporary directory. Since -# any of these caches may have been generated from insecure directories, they -# are all suspect now. Failing to do so typically causes subsequent compinit() -# calls to fail with "command not found: compdef" errors. (That's bad.) function handle_completion_insecurities() { # List of the absolute paths of all unique insecure directories, split on # newline from compaudit()'s output resembling: @@ -22,39 +18,27 @@ function handle_completion_insecurities() { insecure_dirs=( ${(f@):-"$(compaudit 2>/dev/null)"} ) # If no such directories exist, get us out of here. - if (( ! ${#insecure_dirs} )); then - print "[oh-my-zsh] No insecure completion-dependent directories detected." - return - fi + [[ -z "${insecure_dirs}" ]] && return # List ownership and permissions of all insecure directories. print "[oh-my-zsh] Insecure completion-dependent directories detected:" ls -ld "${(@)insecure_dirs}" - print "[oh-my-zsh] For safety, completions will be disabled until you manually fix all" - print "[oh-my-zsh] insecure directory permissions and ownership and restart oh-my-zsh." - print "[oh-my-zsh] See the above list for directories with group or other writability.\n" - # Locally enable the "NULL_GLOB" option, thus removing unmatched filename - # globs from argument lists *AND* printing no warning when doing so. Failing - # to do so prints an unreadable warning if no completion caches exist below. - setopt local_options null_glob + cat <<EOD - # List of the absolute paths of all unique existing completion caches. - local -aU zcompdump_files - zcompdump_files=( "${ZSH_COMPDUMP}"(.) "${ZDOTDIR:-${HOME}}"/.zcompdump* ) +[oh-my-zsh] For safety, we will not load completions from these directories until +[oh-my-zsh] you fix their permissions and ownership and restart zsh. +[oh-my-zsh] See the above list for directories with group or other writability. - # Move such caches to a temporary directory. - if (( ${#zcompdump_files} )); then - # Absolute path of the directory to which such files will be moved. - local ZSH_ZCOMPDUMP_BAD_DIR="${ZSH_CACHE_DIR}/zcompdump-bad" +[oh-my-zsh] To fix your permissions you can do so by disabling +[oh-my-zsh] the write permission of "group" and "others" and making sure that the +[oh-my-zsh] owner of these directories is either root or your current user. +[oh-my-zsh] The following command may help: +[oh-my-zsh] compaudit | xargs chmod g-w,o-w - # List such files first. - print "[oh-my-zsh] Insecure completion caches also detected:" - ls -l "${(@)zcompdump_files}" +[oh-my-zsh] If the above didn't help or you want to skip the verification of +[oh-my-zsh] insecure directories you can set the variable ZSH_DISABLE_COMPFIX to +[oh-my-zsh] "true" before oh-my-zsh is sourced in your zshrc file. - # For safety, move rather than permanently remove such files. - print "[oh-my-zsh] Moving to \"${ZSH_ZCOMPDUMP_BAD_DIR}/\"...\n" - mkdir -p "${ZSH_ZCOMPDUMP_BAD_DIR}" - mv "${(@)zcompdump_files}" "${ZSH_ZCOMPDUMP_BAD_DIR}/" - fi +EOD } diff --git a/lib/completion.zsh b/lib/completion.zsh index bbd021656..c7db2eb7b 100644 --- a/lib/completion.zsh +++ b/lib/completion.zsh @@ -5,7 +5,7 @@ WORDCHARS='' unsetopt menu_complete # do not autoselect the first completion entry unsetopt flowcontrol -setopt auto_menu # show completion menu on succesive tab press +setopt auto_menu # show completion menu on successive tab press setopt complete_in_word setopt always_to_end @@ -25,6 +25,9 @@ else fi unset CASE_SENSITIVE HYPHEN_INSENSITIVE +# Complete . and .. special directories +zstyle ':completion:*' special-dirs true + zstyle ':completion:*' list-colors '' zstyle ':completion:*:*:kill:*:processes' list-colors '=(#b) #([0-9]#) ([0-9a-z-]#)*=01;34=0=01' diff --git a/lib/correction.zsh b/lib/correction.zsh index 3e1415a0b..c635236b5 100644 --- a/lib/correction.zsh +++ b/lib/correction.zsh @@ -1,4 +1,5 @@ if [[ "$ENABLE_CORRECTION" == "true" ]]; then + alias cp='nocorrect cp' alias ebuild='nocorrect ebuild' alias gist='nocorrect gist' alias heroku='nocorrect heroku' diff --git a/lib/directories.zsh b/lib/directories.zsh index a50a692c8..cf87bd7e4 100644 --- a/lib/directories.zsh +++ b/lib/directories.zsh @@ -21,14 +21,18 @@ alias 9='cd -9' alias md='mkdir -p' alias rd=rmdir -alias d='dirs -v | head -10' + +function d () { + if [[ -n $1 ]]; then + dirs "$@" + else + dirs -v | head -10 + fi +} +compdef _dirs d # List directory contents alias lsa='ls -lah' alias l='ls -lah' alias ll='ls -lh' alias la='ls -lAh' - -# Push and pop directories on directory stack -alias pu='pushd' -alias po='popd' diff --git a/lib/functions.zsh b/lib/functions.zsh index 9f11318d2..61dfa4780 100644 --- a/lib/functions.zsh +++ b/lib/functions.zsh @@ -11,33 +11,27 @@ function upgrade_oh_my_zsh() { } function take() { - mkdir -p $1 - cd $1 + mkdir -p $@ && cd ${@:$#} } function open_command() { - emulate -L zsh - setopt shwordsplit - local open_cmd # define the open command case "$OSTYPE" in darwin*) open_cmd='open' ;; cygwin*) open_cmd='cygstart' ;; - linux*) open_cmd='xdg-open' ;; + linux*) [[ "$(uname -r)" != *icrosoft* ]] && open_cmd='nohup xdg-open' || { + open_cmd='cmd.exe /c start ""' + [[ -e "$1" ]] && { 1="$(wslpath -w "${1:a}")" || return 1 } + } ;; msys*) open_cmd='start ""' ;; *) echo "Platform $OSTYPE not supported" return 1 ;; esac - # don't use nohup on OSX - if [[ "$OSTYPE" == darwin* ]]; then - $open_cmd "$@" &>/dev/null - else - nohup $open_cmd "$@" &>/dev/null - fi + ${=open_cmd} "$@" &>/dev/null } # @@ -52,8 +46,7 @@ function open_command() { # 1 if it does not exist # function alias_value() { - alias "$1" | sed "s/^$1='\(.*\)'$/\1/" - test $(alias "$1") + (( $+aliases[$1] )) && echo $aliases[$1] } # @@ -81,12 +74,12 @@ function try_alias_value() { # 0 if the variable exists, 3 if it was set # function default() { - test `typeset +m "$1"` && return 0 + (( $+parameters[$1] )) && return 0 typeset -g "$1"="$2" && return 3 } # -# Set enviroment variable "$1" to default value "$2" if "$1" is not yet defined. +# Set environment variable "$1" to default value "$2" if "$1" is not yet defined. # # Arguments: # 1. name - The env variable to set @@ -95,8 +88,8 @@ function default() { # 0 if the env variable exists, 3 if it was set # function env_default() { - env | grep -q "^$1=" && return 0 - export "$1=$2" && return 3 + (( ${${(@f):-$(typeset +xg)}[(I)$1]} )) && return 0 + export "$1=$2" && return 3 } diff --git a/lib/git.zsh b/lib/git.zsh index f7eccb81d..640561e97 100644 --- a/lib/git.zsh +++ b/lib/git.zsh @@ -10,13 +10,10 @@ function git_prompt_info() { # Checks if working tree is dirty function parse_git_dirty() { - local STATUS='' - local FLAGS - FLAGS=('--porcelain') + local STATUS + local -a FLAGS + FLAGS=('--porcelain' '--ignore-submodules=dirty') if [[ "$(command git config --get oh-my-zsh.hide-dirty)" != "1" ]]; then - if [[ $POST_1_7_2_GIT -gt 0 ]]; then - FLAGS+='--ignore-submodules=dirty' - fi if [[ "$DISABLE_UNTRACKED_FILES_DIRTY" == "true" ]]; then FLAGS+='--untracked-files=no' fi @@ -77,8 +74,8 @@ function git_current_branch() { # Gets the number of commits ahead from remote function git_commits_ahead() { if command git rev-parse --git-dir &>/dev/null; then - local commits="$(git rev-list --count @{upstream}..HEAD)" - if [[ "$commits" != 0 ]]; then + local commits="$(git rev-list --count @{upstream}..HEAD 2>/dev/null)" + if [[ -n "$commits" && "$commits" != 0 ]]; then echo "$ZSH_THEME_GIT_COMMITS_AHEAD_PREFIX$commits$ZSH_THEME_GIT_COMMITS_AHEAD_SUFFIX" fi fi @@ -87,8 +84,8 @@ function git_commits_ahead() { # Gets the number of commits behind remote function git_commits_behind() { if command git rev-parse --git-dir &>/dev/null; then - local commits="$(git rev-list --count HEAD..@{upstream})" - if [[ "$commits" != 0 ]]; then + local commits="$(git rev-list --count HEAD..@{upstream} 2>/dev/null)" + if [[ -n "$commits" && "$commits" != 0 ]]; then echo "$ZSH_THEME_GIT_COMMITS_BEHIND_PREFIX$commits$ZSH_THEME_GIT_COMMITS_BEHIND_SUFFIX" fi fi @@ -141,11 +138,15 @@ function git_prompt_status() { STATUS="$ZSH_THEME_GIT_PROMPT_ADDED$STATUS" elif $(echo "$INDEX" | grep '^M ' &> /dev/null); then STATUS="$ZSH_THEME_GIT_PROMPT_ADDED$STATUS" + elif $(echo "$INDEX" | grep '^MM ' &> /dev/null); then + STATUS="$ZSH_THEME_GIT_PROMPT_ADDED$STATUS" fi if $(echo "$INDEX" | grep '^ M ' &> /dev/null); then STATUS="$ZSH_THEME_GIT_PROMPT_MODIFIED$STATUS" elif $(echo "$INDEX" | grep '^AM ' &> /dev/null); then STATUS="$ZSH_THEME_GIT_PROMPT_MODIFIED$STATUS" + elif $(echo "$INDEX" | grep '^MM ' &> /dev/null); then + STATUS="$ZSH_THEME_GIT_PROMPT_MODIFIED$STATUS" elif $(echo "$INDEX" | grep '^ T ' &> /dev/null); then STATUS="$ZSH_THEME_GIT_PROMPT_MODIFIED$STATUS" fi @@ -177,28 +178,6 @@ function git_prompt_status() { echo $STATUS } -# Compares the provided version of git to the version installed and on path -# Outputs -1, 0, or 1 if the installed version is less than, equal to, or -# greater than the input version, respectively. -function git_compare_version() { - local INPUT_GIT_VERSION INSTALLED_GIT_VERSION - INPUT_GIT_VERSION=(${(s/./)1}) - INSTALLED_GIT_VERSION=($(command git --version 2>/dev/null)) - INSTALLED_GIT_VERSION=(${(s/./)INSTALLED_GIT_VERSION[3]}) - - for i in {1..3}; do - if [[ $INSTALLED_GIT_VERSION[$i] -gt $INPUT_GIT_VERSION[$i] ]]; then - echo 1 - return 0 - fi - if [[ $INSTALLED_GIT_VERSION[$i] -lt $INPUT_GIT_VERSION[$i] ]]; then - echo -1 - return 0 - fi - done - echo 0 -} - # Outputs the name of the current user # Usage example: $(git_current_user_name) function git_current_user_name() { @@ -210,8 +189,3 @@ function git_current_user_name() { function git_current_user_email() { command git config user.email 2>/dev/null } - -# This is unlikely to change so make it all statically assigned -POST_1_7_2_GIT=$(git_compare_version "1.7.2") -# Clean up the namespace slightly by removing the checker function -unfunction git_compare_version diff --git a/lib/history.zsh b/lib/history.zsh index 5de71c2d3..52e45bf4c 100644 --- a/lib/history.zsh +++ b/lib/history.zsh @@ -1,24 +1,40 @@ -## Command history configuration -if [ -z "$HISTFILE" ]; then - HISTFILE=$HOME/.zsh_history -fi +## History wrapper +function omz_history { + local clear list + zparseopts -E c=clear l=list -HISTSIZE=10000 -SAVEHIST=10000 + if [[ -n "$clear" ]]; then + # if -c provided, clobber the history file + echo -n >| "$HISTFILE" + echo >&2 History file deleted. Reload the session to see its effects. + elif [[ -n "$list" ]]; then + # if -l provided, run as if calling `fc' directly + builtin fc "$@" + else + # unless a number is provided, show all history events (starting from 1) + [[ ${@[-1]-} = *[0-9]* ]] && builtin fc -l "$@" || builtin fc -l "$@" 1 + fi +} -# Show history -case $HIST_STAMPS in - "mm/dd/yyyy") alias history='fc -fl 1' ;; - "dd.mm.yyyy") alias history='fc -El 1' ;; - "yyyy-mm-dd") alias history='fc -il 1' ;; - *) alias history='fc -l 1' ;; +# Timestamp format +case ${HIST_STAMPS-} in + "mm/dd/yyyy") alias history='omz_history -f' ;; + "dd.mm.yyyy") alias history='omz_history -E' ;; + "yyyy-mm-dd") alias history='omz_history -i' ;; + "") alias history='omz_history' ;; + *) alias history="omz_history -t '$HIST_STAMPS'" ;; esac -setopt append_history -setopt extended_history -setopt hist_expire_dups_first -setopt hist_ignore_dups # ignore duplication command history list -setopt hist_ignore_space -setopt hist_verify -setopt inc_append_history -setopt share_history # share command history data +## History file configuration +[ -z "$HISTFILE" ] && HISTFILE="$HOME/.zsh_history" +HISTSIZE=50000 +SAVEHIST=10000 + +## History command configuration +setopt extended_history # record timestamp of command in HISTFILE +setopt hist_expire_dups_first # delete duplicates first when HISTFILE size exceeds HISTSIZE +setopt hist_ignore_dups # ignore duplicated commands history list +setopt hist_ignore_space # ignore commands that start with space +setopt hist_verify # show command with history expansion to user before running it +setopt inc_append_history # add commands to HISTFILE in order of execution +setopt share_history # share command history data diff --git a/lib/misc.zsh b/lib/misc.zsh index c81dab413..61571afc9 100644 --- a/lib/misc.zsh +++ b/lib/misc.zsh @@ -1,7 +1,7 @@ -## Load smart urls if available -# bracketed-paste-magic is known buggy in zsh 5.1.1 (only), so skip it there; see #4434 autoload -Uz is-at-least -if [[ $ZSH_VERSION != 5.1.1 ]]; then + +# *-magic is known buggy in some versions; disable if so +if [[ $DISABLE_MAGIC_FUNCTIONS != true ]]; then for d in $fpath; do if [[ -e "$d/url-quote-magic" ]]; then if is-at-least 5.1; then @@ -18,13 +18,11 @@ fi ## jobs setopt long_list_jobs -## pager -export PAGER="less" -export LESS="-R" +env_default 'PAGER' 'less' +env_default 'LESS' '-R' ## super user alias -alias _='sudo' -alias please='sudo' +alias _='sudo ' ## more intelligent acking for ubuntu users if which ack-grep &> /dev/null; then @@ -33,10 +31,5 @@ else alias afind='ack -il' fi -# only define LC_CTYPE if undefined -if [[ -z "$LC_CTYPE" && -z "$LC_ALL" ]]; then - export LC_CTYPE=${LANG%%:*} # pick the first entry from LANG -fi - # recognize comments setopt interactivecomments diff --git a/lib/prompt_info_functions.zsh b/lib/prompt_info_functions.zsh index 335c02a3d..5069c4b21 100644 --- a/lib/prompt_info_functions.zsh +++ b/lib/prompt_info_functions.zsh @@ -10,9 +10,15 @@ # Dummy implementations that return false to prevent command_not_found # errors with themes, that implement these functions # Real implementations will be used when the respective plugins are loaded -function chruby_prompt_info hg_prompt_info pyenv_prompt_info \ - rbenv_prompt_info svn_prompt_info vi_mode_prompt_info \ - virtualenv_prompt_info { +function chruby_prompt_info \ + rbenv_prompt_info \ + hg_prompt_info \ + pyenv_prompt_info \ + svn_prompt_info \ + vi_mode_prompt_info \ + virtualenv_prompt_info \ + jenv_prompt_info \ +{ return 1 } @@ -22,10 +28,13 @@ function rvm_prompt_info() { [ -f $HOME/.rvm/bin/rvm-prompt ] || return 1 local rvm_prompt rvm_prompt=$($HOME/.rvm/bin/rvm-prompt ${=ZSH_THEME_RVM_PROMPT_OPTIONS} 2>/dev/null) - [[ "${rvm_prompt}x" == "x" ]] && return 1 - echo "${ZSH_THEME_RVM_PROMPT_PREFIX:=(}${rvm_prompt}${ZSH_THEME_RVM_PROMPT_SUFFIX:=)}" + [[ -z "${rvm_prompt}" ]] && return 1 + echo "${ZSH_THEME_RUBY_PROMPT_PREFIX}${rvm_prompt}${ZSH_THEME_RUBY_PROMPT_SUFFIX}" } +ZSH_THEME_RVM_PROMPT_OPTIONS="i v g" + + # use this to enable users to see their ruby version, no matter which # version management system they use function ruby_prompt_info() { diff --git a/lib/spectrum.zsh b/lib/spectrum.zsh index 87092d8ae..312ab2248 100644 --- a/lib/spectrum.zsh +++ b/lib/spectrum.zsh @@ -1,7 +1,7 @@ #! /bin/zsh # A script to make using 256 colors in zsh less painful. # P.C. Shyamshankar <sykora@lucentbeing.com> -# Copied from http://github.com/sykora/etc/blob/master/zsh/functions/spectrum/ +# Copied from https://github.com/sykora/etc/blob/master/zsh/functions/spectrum/ typeset -AHg FX FG BG diff --git a/lib/termsupport.zsh b/lib/termsupport.zsh index 871ab28df..aa14f3f07 100644 --- a/lib/termsupport.zsh +++ b/lib/termsupport.zsh @@ -21,7 +21,7 @@ function title { print -Pn "\e]2;$2:q\a" # set window name print -Pn "\e]1;$1:q\a" # set tab name ;; - screen*) + screen*|tmux*) print -Pn "\ek$1:q\e\\" # set screen hardstatus ;; *) @@ -80,7 +80,7 @@ preexec_functions+=(omz_termsupport_preexec) # Keep Apple Terminal.app's current working directory updated -# Based on this answer: http://superuser.com/a/315029 +# Based on this answer: https://superuser.com/a/315029 # With extra fixes to handle multibyte chars and non-UTF-8 locales if [[ "$TERM_PROGRAM" == "Apple_Terminal" ]] && [[ -z "$INSIDE_EMACS" ]]; then diff --git a/lib/theme-and-appearance.zsh b/lib/theme-and-appearance.zsh index 5c5bb0e6d..5016d86ca 100644 --- a/lib/theme-and-appearance.zsh +++ b/lib/theme-and-appearance.zsh @@ -1,45 +1,54 @@ # ls colors autoload -U colors && colors -export LSCOLORS="Gxfxcxdxbxegedabagacad" # Enable ls colors -if [ "$DISABLE_LS_COLORS" != "true" ] -then - # Find the option for using colors in ls, depending on the version: Linux or BSD - if [[ "$(uname -s)" == "NetBSD" ]]; then +export LSCOLORS="Gxfxcxdxbxegedabagacad" + +# TODO organise this chaotic logic + +if [[ "$DISABLE_LS_COLORS" != "true" ]]; then + # Find the option for using colors in ls, depending on the version + if [[ "$OSTYPE" == netbsd* ]]; then # On NetBSD, test if "gls" (GNU ls) is installed (this one supports colors); # otherwise, leave ls as is, because NetBSD's ls doesn't support -G - gls --color -d . &>/dev/null 2>&1 && alias ls='gls --color=tty' - elif [[ "$(uname -s)" == "OpenBSD" ]]; then + gls --color -d . &>/dev/null && alias ls='gls --color=tty' + elif [[ "$OSTYPE" == openbsd* ]]; then # On OpenBSD, "gls" (ls from GNU coreutils) and "colorls" (ls from base, # with color and multibyte support) are available from ports. "colorls" # will be installed on purpose and can't be pulled in by installing # coreutils, so prefer it to "gls". - gls --color -d . &>/dev/null 2>&1 && alias ls='gls --color=tty' - colorls -G -d . &>/dev/null 2>&1 && alias ls='colorls -G' + gls --color -d . &>/dev/null && alias ls='gls --color=tty' + colorls -G -d . &>/dev/null && alias ls='colorls -G' + elif [[ "$OSTYPE" == (darwin|freebsd)* ]]; then + # this is a good alias, it works by default just using $LSCOLORS + ls -G . &>/dev/null && alias ls='ls -G' + + # only use coreutils ls if there is a dircolors customization present ($LS_COLORS or .dircolors file) + # otherwise, gls will use the default color scheme which is ugly af + [[ -n "$LS_COLORS" || -f "$HOME/.dircolors" ]] && gls --color -d . &>/dev/null && alias ls='gls --color=tty' else - ls --color -d . &>/dev/null 2>&1 && alias ls='ls --color=tty' || alias ls='ls -G' + # For GNU ls, we use the default ls color theme. They can later be overwritten by themes. + if [[ -z "$LS_COLORS" ]]; then + (( $+commands[dircolors] )) && eval "$(dircolors -b)" + fi + + ls --color -d . &>/dev/null && alias ls='ls --color=tty' || { ls -G . &>/dev/null && alias ls='ls -G' } + + # Take advantage of $LS_COLORS for completion as well. + zstyle ':completion:*' list-colors "${(s.:.)LS_COLORS}" fi fi setopt auto_cd setopt multios +setopt prompt_subst -if [[ x$WINDOW != x ]] -then - SCREEN_NO="%B$WINDOW%b " -else - SCREEN_NO="" -fi - -# Apply theming defaults -PS1="%n@%m:%~%# " +[[ -n "$WINDOW" ]] && SCREEN_NO="%B$WINDOW%b " || SCREEN_NO="" # git theming default: Variables for theming the git info prompt ZSH_THEME_GIT_PROMPT_PREFIX="git:(" # Prefix at the very beginning of the prompt, before the branch name ZSH_THEME_GIT_PROMPT_SUFFIX=")" # At the very end of the prompt ZSH_THEME_GIT_PROMPT_DIRTY="*" # Text to display if the branch is dirty ZSH_THEME_GIT_PROMPT_CLEAN="" # Text to display if the branch is clean - -# Setup the prompt with pretty colors -setopt prompt_subst +ZSH_THEME_RUBY_PROMPT_PREFIX="(" +ZSH_THEME_RUBY_PROMPT_SUFFIX=")" |